• for pipe sizes from 1" to 2 1/2"
  • for viscosities up to 40.000 cSt
  • materials: housing from aluminum, spindles from steel, process connection from aluminum or steel
  • accuracy: +/- 1% of measured value
  • max. pressure: 350 bar, max. temperature: 150 °C
  • output signals:
    pulses
    programmable frequency output
    programmable switch output (limit switch)
    analog output 4...20 mA or 0...10 V
  • measuring ranges:
    1,4...140 l/min to 25...2500 l/min

More informations

The DV08 flow meter is fitted with twin helical screws, which rotate in opposite directions due to the flow of product being monitored. The rotational speed is proportional to the flow rate. The rotary motion of the screws is detected by a sensor which emits two pulses per revolution. Each pulse signal rep­resents a pre-defined volume of product. The flowmeter doesn't have to be taken out of the pipe system for changing the pick-up system because the pick-up is hermetically sealed from the medium. The viscosity of the product has vir­tually no effect on the DV08 due to the volumetrical measure­ment technique used.

Typical applications

The DV08 can be used for flow measurement, monitoring and totalizing of liquid, viscous and self-lubricating products up to 40,000 mPas. The device is suitable for use in hydraulic sys­tems, and for lubricant monitoring, metering soaps, pastes and emulsions – to name but a few of its application areas.

PDF Information

For Further Information

E-mail to This email address is being protected from spambots. You need JavaScript enabled to view it.

Oval Wheel, Nutating Disc and Gear Wheel Flowmeters

Copyright MAXXmarketing GmbH
JoomShopping Download & Support