• independent of pressure or temperature variations of the medium
  • compact design, no straight pipe runs in front of the meter necessary
  • materials: aluminium or stainless steel
  • max. pressure: up to 11 bar, max. temperature: up to 50 °C
  • accuracy: +/- 1.5 % FS (standard) or
    +/- 0.3 % FS & +/- 0,5 % MV (enhanced accuracy)
  • turn-down ratio 1:50 optional 1:100
  • analogue output and control input: 4...20 mA, other analogue signals optionally
  • serial interface
  • supply voltage: 24 VDC
  • ranges:
    005-25 Nml/min ... 9-450 Nl/min gas

More informations

The DB05 thermal mass flow meter and controller is a modu­lar measuring system for measuring and controlling the mass flow of gases. The device is optionally available as a pure flow meter or with integrated control valve with PI control behav­iour.

As standard, the DB05 contains analogue current or voltage signals for the instantaneous flow rate and, in the controller function, an analogue input for setpoint specification. A mea­sured value display is available as an option. A variety of non-aggressive gases with measuring ranges from 0...25 ml/min to 0...450 l/min can be measured.

Typical applications

Due to the modular design, the position-independent installa­tion and the simplest cleaning without recalibration, the DB05 can be used for a wide variety of applications such as analyti­cal instruments, in the semiconductor industry, for com­pressed air systems, lasers, welding systems or fuel cells. Depending on the application, the instrument can be supplied with an aluminium or stainless steel housing and with a stan­dard accuracy of 1 % or as a precision instrument with 0.3 % accuracy.

PDF Information

For Further Information

E-mail to This email address is being protected from spambots. You need JavaScript enabled to view it.

Electronic Flowmeters

Copyright MAXXmarketing GmbH
JoomShopping Download & Support